Yacht Sentinel YS PRO, Руководство пользователя

Страница: 24 / 32

24
COLLECTED DATA
YS PRO only sends data when it has a 3G/4G signal. All data can be recorded for months and sent later if
it is out of range. YS Pro collect 5 types of data:
Internal YS PRO data
It includes internal alarms (geofencing, battery, tilt, temperature and G - shock alarms), 3G/4G & GPS signal
strength and Wi - Fi statistics and settings. These data are collected and sent 24/7.
Data from power cable and voltage detector
YS Pro power cable can monitor the voltage of up to 3 batteries. Alarms can be configured if the voltage in
any of these 3 batteries drop below a pre - set level. Each voltage detector cable can detect if the electric
appliance it is wired to (typically bilge pump, water maker, generator or engine) is in use or not. Statistics
about past usage is then shown on the app and can be used for maintenance purpose. These data are col-
lected and sent 24/7.
Data from optional wireless sensors
Any triggers from a sensor would result in an alarm being sent by YS Pro to the app (and the Partner Plat-
form if applicable). YS Pro also collects the Zigbee signal strength and the battery level of each sensor
multiple times per day. These data are collected and sent 24/7.
Video footage from Sentinel Cam 2
If a sim card is inserted in YS Pro, YS Pro can act as a Wi - Fi router and send a short video to the app if
Sentinel Cam 2 detects an intrusion.
Data from NMEA 2000 and other CAN bus
If connected to a CAN bus (NMEA 2000, CANOPEN, J1939), YS Pro collects any data from the bus when
the bus is turned on. The range of NMEA 2000 data is given p.25