Yacht Sentinel Sentinel Domotics, Быстрый старт

Страница: 7 / 10

12 13
A. Plug one end of the micro USB to USB cable provided
into the USB slot on the NMEA gateway, and the other
end into the universal power plug provided.
Power up the NMEA gateway
4
Note:
The NMEA gateway should ONLY be used with the power cable and
power adapter provided.
B. Plug one end of the Ethernet cable provided into
the NMEA Gateway, and the other end into your Wi-Fi
Router. Make sure your Wi-Fi router is ON
A. Using a computer, visit https://www.yacht-sentinel.
com/downloads and download the program depending
on your operating system (Windows or Mac).
B. Open up the file and install the program. A shortcut
called ‘Sentinel Domotics set up’ will be automatically
added to your desktop.
C. Connect your computer to the same Wi-Fi than the
NMEA gateway (LAN or WIFI).
D. Open the program, click ‘Next’ on the wizard and then
‘Scan’.
E. A network called ‘NMEA-GATEWAY-XXXX’ will appear
once the scan is completed. Refresh the page if it’s not
the case.
F. Select this network and type in the username and
password shown on top of the NMEA Gateway case.
Install software
5