— 9 —
II. MicroSD Slot and Card’s Compatibility
The Device has a slot for a MicroSD card that allows you to configure the Device (see Section V)
and update the firmware (see Section VIII).
Since the MicroSD slot is usually not in use when the Device is working, we recommend sealing it
with the sticker that is included with the Device or with a piece of tape to prevent water from entering
the Device through the slot.
The Device supports MicroSD memory cards of all sizes and classes. The MicroSD card must be formatted
on a personal computer before use in the Device. The Device supports the following file systems:
FAT (FAT12, FAT16, MS-DOS) and FAT32. It does not support exFAT, NTFS, or any other file systems.
Be careful when inserting the MicroSD card into the Device. The card is inserted with the label side toward
the LED and with the pin side toward the engine cable.
The Device slot has a ‘push-push’ mechanism that works on a spring and ensures proper card
fixation. Improper loading or unloading (withdrawing your finger to quickly or not waiting
for the click) can result in the card being propelled out of the Device up to 5 meters. To avoid
possible eye injury, loss of or damage to the card, and other hazards, insert and remove the card
with caution.
Содержание YDEG-04
Страница 10: ...10 Figure 1 Device with MicroSD card pin side visible at left label side at right...
Страница 49: ...49 Figure 1 Raymarine c125 MFD devices list with Gateway YDEG 04...
Страница 63: ...63 Appendix E Device Connectors Figure 1 NMEA 2000 connectors of the YDEG 04R left and YDEG 04N right models...