yacht beam 6M Скачать руководство пользователя страница 3

3

SECTION 1 - HOW THE SEARCHLIGHT WORKS

The Yacht Beam 6M was specially designed for mariners who require a high intensity remote controlled searchlight that 

can stand up to the tough marine environment.

The Yacht Beam 6M is a xenon arc searchlight that produces six (6) million peak candle power. All functions of the Yacht 

Beam 6M can be electrically operated by remote control from the pilot area of the vessel. A remote control panel is sup-

plied with the Yacht Beam 6M. An optional slave remote control panel is available (ACR Product No. 1942).

The sleek design and modern construction of the searchlight body makes it attractive for recreational and commercial ves-

sels. The searchlight is totally enclosed and is made of rugged aluminum alloy. It is gasketed and finished to be resistant 

to the weather.

SECTION 2 - PREPARING TO INSTALL

Unpacking the Yacht Beam 6M

Before proceeding with the installation of the Yacht Beam 6M, please verify that the content of the box includes the

following:

• Light housing with wires, 12V (Product number 1943), OR Light assembly, 24V (Product number 1941)

• Yacht Beam 6M xenon bulb (located inside packing foam)

• Joystick

• Product Support Manual

• Instruction sheet for Yacht Beam 6M upgrade (for Product Number 1943), OR Instruction sheet for Yacht Beam 6M

   (for Product Number 1941)

• Warranty card

If any of the above is missing, please contact The Yacht Group Technical Service by email at [email protected]

or by phone at (305) 667-5811. Please be ready to provide the serial number of your unit and location of purchase.

SECTION 3 - INSTALLATION

Wiring the unit

The Yacht Beam 6M Remote Control Searchlight consists of searchlight unit and a master remote control panel. The user 

must supply the cable and/or wire to power the unit (see Appendix A for Cable Selection Tables). The source must be a 

fused 24 VDC, 10 amp supply (product number 1941) or a fused 12 VDC, 20 amp supply (product number 1943). This 

cable is to be attached to the searchlight as shown in the connection diagram. See Figure 1.

CAUTION: Observe polarities when attaching wires!

Содержание 6M












Отзывы: