Yaasa Desk Essential, Руководство по устранению неисправностей

Страница: 5 / 5

5
4.3 ERROR MESSAGES ON THE HANDSET
PROBLEM CAUSE SOLUTION
E01
E02
E07
M1-M2 motor overcurrent
M1 motor hall signal anomaly
1. Check if table motion is blocked
by an obstacle. Remove if neces-
sary.
2. Check if one side of the table
is overloaded. Remove load if
necessary.
3. If the problem persists, contact
customer service.
1. Plug the two motor cables into
the opposite sockets.
2. Perform a manual reset.
3. If the problem persists, contact
customer service.