26
COOL Mode
Press the electrode head repeatedly on your face as if stamping on the
skin (Press
→
Release
→
Move electrode head).
* This mode can also be used over the upper eyelids, lower eyelids, and
outer corner of the eye.
* When using the LED light on the eyelids, be sure to close your eyes
and keep the electrode head at least 5 cm away from the skin.
Press the electrode head repeatedly on your face from the inner corner to the outer corner of
the eye as if stamping on the skin (Press
→
Release
→
Move electrode head).
Press down on the skin for approx. 3 seconds. If you are concerned about dryness of the skin
around the eyes, we recommend using the device for 2 minutes per treatment, twice a day, 5
times a week.
* Do not press down continuously on the skin for longer than 3 seconds.
* Do not move the device while pressing.
EYE CARE Mode
Areas you should not treat: Upper eyelids
* The device can be used around the lower eyelids and outer corner of the eye.