Y5Home 4 Module Switch, Руководство по установке

Страница: 2 / 6

Configure Switchboard Module
Note: Switchboard module MUST be configured into Y5Box before
installing it behind the switchboard panel
Follow the below mentioned steps to connect the switchboard
module with Y5Box using the Y5Home App:
• Open Y5Home App (in mobile, desktop or TV)
(<ip address:3030> for Y5Home browser link)
• Click on “Y5Home Smart Automation” widget on homepage
• Click on “CONFIG MODULES” tab
• Check “Module Config” check box
• Add 16 char module ID in module
id field (You can see 16 char
module id address on switchboard
module as a barcode)
E.g. 01234567ABCDEF01
• Click on “Configure” button
• After few seconds module will be
displayed with red icon