![XZENT xt7010 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/xzent/xt7010/xt7010_instruction-manual_3856599010.webp)
TFT Monitor Operation
Open/Close TFT Monitor
Press the ( ) button on the remote control or press the (
OPEN
) button on the front panel to
open/close the monitor.
TFT Monitor Auto Open
• If “TFT Auto Open” is “On”, when the unit is turned on, the monitor automatically opens to the
last viewing position.
• If “TFT Auto Open” is ”Off” , when the unit is turned on, press the ( ) button on the remote
control or press the (
OPEN
) button on the front panel to open the monitor into the desired
viewing position.
• If “TFT Auto Open” is ”Manual” when the unit is turned on or turned off, the monitor will not open.
See “General setting” for more instructions.
Monitor Tilt Angle Adjustment
The monitor angle can be adjusted for optimum viewing using one of the following methods:
Press the (
) or (
) buttons on the front panel to adjust the tilt angle of the screen one step
at a time.
Press and hold the (
) or ( ) buttons on the front panel to continuously adjust the tilt angle.
Adjust the “Screen Tilt” in the “Screen setting” to adjust the tilt of the screen to the desired degree.
Image Setting
Video output format
The table below shows the video output format for each source.
Playing Source
Video Output Format
FM/AM Tuner
RGB Mode
DVD
RGB Mode
Adjustable parameters
While in RGB mode, the only parameter that can be adjusted is brightness (BRIGHT).
Parameter adjustment procedure
1. Enter picture quality setting mode:
Press the
PIC
button on the remote control or press and hold the
INFO
button on the front panel
of the unit.
2. Select items to set:
Press the ( / ) buttons on the remote control or rotate the
SMART DIAL
button clockwise/
anticlockwise to select an item.
3. Set parameters:
Rotate the“ VOL” on the front panel to adjust the selected feature.
4. Exit picture quality setting mode:
Press the
PIC
button on the remote control or press and hold the
INFO
button on the unit.
NOTE:
A video source must be connected to the AUX input and be playing to access the above
adjustments.
10
MANUAL XT7010:Layout 1 16.11.2007 17:16 Uhr Seite 10