manualshive.com logo in svg

XYZ Robot Bolide Y-01, Руководство пользователя

Поделиться
Скачать
XYZ Robot Bolide Y-01 Скачать руководство пользователя страница 4

03

Safety Guideline

Handling and Personal Safety

Buttons

• 

Before using, take a moment to locate the Power On/Off and directional buttons and familiarize 
yourself with the functions.

Handling

• 

Handle the robot with care at all times.

• 

Pick up the robot by the bar in the event of the following situations:

• 

If the robot comes close to danger, exposure to water, or falling off a surface.

• 

Before the robot knocks over objects.

• 

If the robot’s operation seems erratic.

• 

Procedure for handling in a potentially hazardous event:

1. 

Pick up the robot by bar even if it is still moving.

2. 

Press the Power On/Off button to turn off.

3. 

Put the robot in the starting default posture.

Refer to the User Guide for powering on instructions.

• 

In case of a power emergency, do not touch the robot.

  CAUTION:

Pinching Hazard

• 

Avoid carrying and touching the robot when it is moving, walking or getting up to avoid getting 
pinched.

• 

Keep hand and fingers out of the joint areas to avoid getting caught in between.

• 

To avoid injury, do not place your hands in any joint to prevent damage or personal injury.

Содержание Bolide Y-01

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды