Printing
Nobel 1.0A is both a PC compatible
and a standalone 3D printer. You can
print from the following sources:
Import 3D objects into XYZware_Nobel,
add support structures if necessary
and click on “Print” to setup printing
parameters for slicing and printing.
⑧
Inset the resin bottle
into the cartridge slot
and install the filling
tubes by first connect-
ing the black tube to
the thick nozzle. Then
attach the transparent
tube to the thin nozzle
and push the tube all
the way down. After
installing the filling
tubes,
cover the lid
.
⑨
Connect the printer to your PC via USB
wire and install the printing software
XYZware_Nobel from the bundled USB
flash drive.
Export 3D models in .3wn format with
XYZware_Nobel and save the file to
the USB flash drive.
Insert the USB flash drive to the USB
drive port at the back of the printer.
* Remember to place the lid over the
printer before printing.
* Sample files are provided in the bundled
USB drive. To print the sample, please slice
the stl files with XYZware_Nobel before
printing, or selected the sliced .3wn files.
When removing prints from the printer,
perform the following post-processing
procedure for your printed object and printer
maintenance
①-A
Turn the platform locker counter-clock-
wise until it stops.
①-B
Grasp the locker and pull the platform
out.
*Connect your PC to the printer
before installing the software, or the
installation may not complete.
*Apply printer firmware and
XYZware_Nobel updates when
prompted by the software for stable
printing performance.
1
Print from USB
2
Print from PC
②
Scrape off the print.
* Always wear gloves before coming into
contact uncured resin or cleaning prints.
*Operate gently to avoid scratching
the surface.
* Avoid dripping resin onto anything other
than the platform or the resin tank, or the
printer may malfunction.
③
Pour alcohol (≧75% alcohol) into the
rinse basket, and shake the print for 10
minutes. (* Alcohol is not supplied.)
④
Remove any residue from the resin
tank with the scraper gently.
⑤-A
Reinstall the platform
⑤-B
turn the locker clockwise until it
stops.
Printed Object
Removal and Cleaning
*Always remove the platform before
removing the resin tank to avoid dripping
leftover material onto the tank slot.
-2-
(Global) XYZprinting, Inc. Website: http://global.xyzprinting.com/
(EU) XYZprinting Netherlands B.V. Website: http://eu.xyzprinting.com Address: Wagenmakerstraat 7, 2984 BD Ridderkerk The Netherlands
Online Customer Service Desk: http://support.xyzprinting.com/eu_en/Help/ticket/home
①-A
①-B
Resources
For complete instructions and
troubleshooting, please refer to the product
manual. You can find the product manual in
the bundled USB flash drive or download
the latest version from:
http://support.xyzprinting.com/us_en/Help/download
For tutorial videos, please go to:
http://support.xyzprinting.com/us_en/Help/tutorial
Important Notice
Wear safety goggles before using the printer.
Do not let children operate this device without
adult supervision. Moving parts may cause
serious injury.
Please place and use the printer in a well
ventilated area. The process of printing will
produce a small amount of non-toxic odor.
Having a well ventilated area will ensure a more
comfortable environment.
For a complete guide on precautions, clean-up
procedures, handling procedures, storage
procedures, and suggestions on protection, see
the "Resin Care" section in your product manual.
If unused for more than a week, pigments in the
resin may settle at the bottom of the cartridge or
the tank. Shake/stir well before using.
For the best printing performance, resin should
be used up within 3 months after purchasing and
within 1 month of opening. Resin should
preferably be stored at temperatures between
10-32°C (50-89.6°F).
Please ensure that the recommended operating
conditions are adhered to. (Operating
temperature 18-28℃ (64.4-82.4℉)/ humidity
40-80% RH); If a different operating temperature
is printed on the label on the resin bottle, please
adhere to recommended conditions on the
label.)
Due to the nature of the printing technology and
material, the resin tank may develop cloudy
regions overtime where the UV laser cures the
resin and may lead to print fails. Please avoid
printing over the cloudy area in the tank. Moving
the print location around the platform can help
prolong the life of the tank.
Ch
ange to a new tank when over 2/3 of the
surface gets cloudy.
Use separate resin tanks for resins of different
color. Mixing resins of different color may affect
printing quality.
Always perform “Horizon Calibration” after
changing to a new tank or a tank different the
one used for last print. Be sure to empty the tank
before calibrating the platform.
“AUTO FILL” is enabled by default. The
resin tank is auto-filled before printing and
when resin low is detected. You don’t
need to fill the tank manually.
Before changing the resin
bottle, please detach the transparent tube
from the cap and then the black tube.
Note
Select “PRINT FROM USB” in main
menu to proceed.
