P 2
Release Notes
Release Notes – da Vinci Mini with Microsoft 3D Builder
Important information about how to optimize your printing experience.
You can either start from scratch or import an existing model. In the top right of the screen,
you can find a 3D print button. Click it to prepare for 3D printing.
In the dropdown menu, choose ‘XYZprinting da Vinci Mini W’.
Please check the printer firmware version and upgrade to Version 1.0.9 or above.
Upgrading Firmware using XYZware is recommended,
please go to XYZprinting for more support documentation: http://support.xyzprinting.com/
Level the print bed and adjust the Z-offset value in XYZware before printing to get a high quality print.
When loading or unloading filament in XYZware, always make sure the print button on the
da Vinci Mini is green before launching 3D Builder.
Connect to the da Vinci Mini by USB Cord before launching 3D Builder
Always make sure the printing area is clean and LED status indicator is green before
clicking “Print”.
First Time Use
Getting Started with 3D Builder
da Vinci Mini 3D Printer
Microsoft® 3D Builder
