Revision 1.01
WebRelay-10
TM
Users Manual
1. Main Header Text:
This text will be displayed in the main header area of the control page. This field can be up to 25 characters
in length.
2. Auto Refresh Page:
Web pages traditionally display static information. The WebRelay-10
TM
control page, however, displays
information that is dynamic. Each time the control page is loaded to the browser, it displays a snapshot of
the current status of the unit. If the state of the unit changes, the information on the control page will be
outdated unless the page is re-loaded. Whenever a user changes the state of the relay via the web browser,
the web page will automatically reload the control page to display current information. If, however, the
relay state changes due to a change due to a command sent from another machine, the relay state will not be
updated and the control page information will be obsolete. The ‘Auto Refresh Page’ option will cause the
control page to continually update its contents by setting a timer in the web page that causes it to be reloaded
at a specified time interval.
3. Duration:
If the ‘Auto Refresh Page’ option is set to
Yes
, this field specifies the time interval in seconds that the page
will be refreshed. It can be set from 1 to 32 seconds.
2.4.4 Relay Options Page
This page is used to set up the function of each of the 10 relays, and how each relay is represented on the
control page. A drop down box at the top of the page selects the relay for which the options on the page will
apply when the setup page is submitted.
Xytronix Research & Design, Inc.
page 18
