ٛ
10. “ALARM”- Time setting
ٛ
11.
Temperature up pad (increase numerals) for PREHEAT
ٛ
12.
Temperature down pad (decrease numerals) for PREHEAT
ٛ
13. MODEL: Temperature offset pad
ٛ
14. Fahrenheit (
℉
) temperature light for PREHEAT
ٛ
15. Celsius (
℃
) temperature light for PREHEAT
ٛ
16. Temperature setting display (3 segment)
IR810 Back panel
ٛ
1.
Foot switch socket (4 pin)
ٛ
2.
DC12V Cooling fan socket (3 pin)
ٛ
3..Output to PREHEATER
ٛ
4.
Fuse Holder
Solderlight connector
ٛ
5.
AC power inlet
Infra red pre-heater back panel
1
Quartz heater gets faster heat-up time.
2
The efficient pre-heat height is 45mm from quartz surface to the bottom of the PCB
assembly.
3
The temperature of back heater setting at 22
0
℃
can get apparent preheating (75%
energy is provided by the back heater and 25% of the energy provided by the top heater) get
efficient preheating performance and prevent the bent of bigger PCB and/or damage the
components just heating from the top heater.
