Xylem WTW pHotoFlex Turb, Руководство по эксплуатации

Страница: 70 / 104

Operation pHotoFlex
®
Turb
70
ba75976e07 09/2021
4.9.6 Transmitting data to a printer or terminal program
With a printer connected or a connection to a terminal program existing, you
can transmit data in the following ways:
4.9.7 Examples of data transmitted (printer, terminal program)
The data are output according to the selected output format.
Example;
output format
ASCII
The ASCII output format delivers formatted datasets.
Data Operation / description
Individual data
(e.g. measured val-
ue, calibration pro-
tocol, AQS
protocol)
 Display the data and press <PRT> .
The data being shown on the display are transmit-
ted to the interface.
 Simultaneously with every manual storage pro-
cess.
Stored measured
values  Display the saved data and press <PRT> .
 All datasets according to the filter criteria
(section 4.4) via the
Ausgabe RS232/USB
func-
tion (see section 4.8.2.).
With the <PRT> key you output data that is being shown on the
display to the interface (displayed measured values, stored mea-
surement datsets, calibration record).
pHotoFlex
Ser. no.
12345678
31.10.04 09:56:20
ID: 1
10.01 (pH) AR
25 °C
________________________________________
pHotoFlex
Ser. no.
12345678
31.10.04 15:48:08
ID 1 / PROG 2
1.1 mg/l Pb [BV][9 + 1]
________________________________________
etc...