Xylem WTW Oxi 3210, Руководство по эксплуатации

Страница: 26 / 52

Operation Oxi 3210
26 ba75795e07 10/2021
4.3.2 Data storage
This menu contains all functions to display, edit and erase stored mea-
sured values.
Note
Detailed information on the memory functions of the Oxi 3210 is given
in section 4.5.
4.3.3 Automatic Stability control
The function, automatic Stability control (AutoRead) continually checks
the stability of the measurement signal. The stability has a considerable
impact on the reproducibility of measured values.
You can activate or switch off the automatic Stability control function
(see section 4.4.3).
The measured parameter flashes on the display

as soon as the measured value is outside the stability range

when you switch over between the measured parameters with
<M>
.

when the automatic Stability control is switched off.
System / Reset - Resets the system settings
to the delivery condition
(see section 4.6.2).
Menu item Setting Explanation