Xylem WTW Multi 3320, Руководство по эксплуатации

Страница: 57 / 106

Multi 3320 Settings
ba77053e04 07/2018
57
10 Settings
10.1 Measurement settings
10.1.1 Settings for pH measurements
The settings for pH measurements are made in the menu for calibration and
measurement settings of the pH/ORP measurement. To open the settings, dis-
play the required measured parameter in the measured value display and
press the
<ENTER> key. After completing the settings, switch to the measured
value display with <M> .
In the following table, only those settings are listed that concern the pH mea-
surement.
Default settings are printed in
bold .
Menu item Possible set-
ting Explanation
Calibration /
Calibration record
- Displays the calibration record of
the last calibration.
Calibration /
Calibration data
storage
/ Display
- Displays the calibration record.
Further options:
 Scroll through the calibration
records with
<

><

> .
 Output the displayed calibration
record to the interface with
<F2> / [USB output] .
 Output all calibration records to
the interface with
<F2
_
> / [USB
output] .
 Quit the display with <F1> /
[Back] or <ENTER> .
 Switch directly to the measured
value display with
<M> .
Calibration /
Calibration data
storage
/ Output to
USB
- Outputs the calibration records to
the interface.
Calibration / Buffer TEC
NIST/DIN
ConCal
...
Buffer sets to be used for pH cali-
bration (see section 5.2 C
ALIBRA
-
TION
, page 25).
Calibration / One
point calibration
Yes
No
Quick calibration with 1 buffer