Xylem wtw MIQ/IDS, Руководство по эксплуатации

Страница: 27 / 62

MIQ/IDS Dissolved oxygen
27
ba77277d01 01/2024
6 Dissolved oxygen
The MIQ/IDS module connects IDS sensors to the IQ S
ENSOR
N
ET
.
Suitable sensors: see section 6.5 A
CCESSORIES
NOTE
The FDO
®
925 oxygen sensor can be damaged by the presence of chlorine or
ozone in the measured medium.
6.1 Measuring
Prerequisites 
The IQ S
ENSOR
N
ET
system is in operation
(see IQ S
ENSOR
N
ET
system operating manual).

The sensor is connected to the MIQ/IDS module
(see section 3.7).
CAUTION
Contact with the sample can lead to danger to the user!
Depending on the type of sample, suitable protective mea
-
sures must be taken (protective clothing, protective goggles,
etc.).
Check the sensor at regular intervals (see section 6.2).
1. Install the sensor in a flow through armature and provide the sample flow.
or
Submerse the sensor in the sample.