Xylem wtw Cl 800 DIN, Руководство по эксплуатации

Страница: 18 / 46

18
ba15355d04 12/2021
Conditioning, calibration, measurement Cl 800
Conditioning, calibration, measurement
General
information
When operating the electrode ensure that

the filling opening (1) for the bridge electrolyte is open

the inner junctions (3) are covered with bridge electrolyte

no air bubbles are in the bridge electrolyte

the depth of immersion is within the optimum range:
Before measuring
4 When doing so refill any spilled bridge electrolyte so that the inner
junctions are covered with bridge electrolyte.
5 Rinse the combination electrode with deionized water.
6 Wipe the shaft using a clean paper towel.
Minimum depth of im-
mersion The ground junction (4) must be covered
Maximum depth of im-
mersion Approx. 1 cm below the fluid level (2) of the
bridge electrolyte
1
2
3
4
1 Condition every ion sensitive electrode in standard solution before
using it.