Xylem sensus AutoRead Скачать руководство пользователя | Manualshive

Страница: 81 / 161

background image

HHDs use the Meter ID and Meter Type fields to accurately store meter reading information

to the correct account, if a duplicate or missing Meter ID exists in the route data, AutoRead

must discard the missing or duplicate records before loading the HHD. AutoRead will

always keep the first occurrence of a certain ID number, and set aside any duplicates that

follow. Similarly, if a record is missing a Meter ID or Meter Type, AutoRead will also set aside

the record, as it will not be able to identify that there is a meter located at the specified

address. AutoRead sets aside these duplicate or missing records in the

Route Exceptions

tab to notify you that there were problems importing all of the data. It is not necessary to

correct the Route Exceptions prior to loading the HHD, but it can be helpful to do so. The

Route Exceptions will NOT appear on the HHD until the duplicate or missing information is

corrected, and a corrected route file is imported into AutoRead.
Listed on the

Route Exceptions

tab are several columns of data. The Operation column

refers to the function that was being performed when the exception occurred (i.e. Import,

Load, Read). In some cases, a duplicate Meter ID is found when loading multiple routes to

a single HHD. If the same meter number exists in two separate routes, AutoRead will not

discard the duplicate unless the two routes are loaded to the same HHD.
The Reason column refers to the reason why a record was set aside. This is usually due to

Meter ID Missing, Meter Type Missing, or Duplicate Meter ID, but other reasons are possible.

Refer to the troubleshooting section or contact Technical Support for further information.
The Record column refers to the number of the record in the import file. This number is

simply based on the order that AutoRead encountered the record from top to bottom in the

Import file. A record number of 5 means that the record was the 5th record in the file.
The Description column displays other specific information, if any is available, about the

account(s) in question. Often the column will display Account Number, Meter Number,

Meter Type and Address. This information is provided so that you can locate the problem

account in the billing software and correct the indicated problem. If a meter is duplicated,

both affected accounts display in the Description column. It is possible to adjust the column

widths and scroll the screen from left to right to see more information if the screen area is

limited.

Route Exceptions Occurring after a Read Data has been Performed

When reading Precision Meters more than one reading can occur on a data line from the

meter. In cases where this is encountered the first reading is accepted and the remaining

reading(s) are placed in the

Route Exceptions

file.

It is possible to print the list of Route Exceptions for reference using the

Print

button. It is

located at the top of the screen to the right of the

Function

menu.

Fix Route Exceptions

As is the case with all Route Exceptions, the duplicate and missing meter information must

be corrected in the billing software, and a new route file must be created. You can then

Clear the old route information from the AutoRead database, and Import the corrected route

7 Additional Route Processing Options | 81

«
...
79
80
81
82
83
...
»

Содержание sensus AutoRead


































































































































































Отзывы:

Нет отзывов

Похожие инструкции для sensus AutoRead

Бренд: BANTE inststruments Страницы: 15

Бренд: 3Bays Страницы: 21

Бренд: CAENels Страницы: 75

Бренд: ICM Controls Страницы: 8

Бренд: National Instruments Страницы: 38

Бренд: G-Tek Страницы: 83

Бренд: Nagano Keiki Страницы: 25

Бренд: ICS Schneider Messtechnik Страницы: 40

Бренд: Lasertec Страницы: 21

DT4120 PS Series

Бренд: Datcon Страницы: 92

Бренд: JensPrima Страницы: 20

SoundExpert LxT

Бренд: Larson Davis Страницы: 307

Бренд: Lutron Electronics Страницы: 23

Бренд: wattwatchers Страницы: 14

Бренд: X-Rite Страницы: 54

Бренд: 365SMART Страницы: 20

Бренд: Ditel Страницы: 2

Бренд: Ulvac Страницы: 75

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды