en – Original instructions
22
SCUBA – Additional Installation, Operation and Maintenance Instructions
5.3
Starting and stopping
Units with float
1.
Connect the plug to the mains and/or turn on the switch: depending on the position of the
float, the unit stays idle or starts to operate.
2.
With the unit in operation, check that the liquid is actually being pumped and that there is
no:
•
Leaking of fluid from the piping
•
Abnormal noise or vibration
•
Vortex nearby the suction port.
3.
When the float reaches the low position (minimum liquid level), the pump automatically
stops.
Units without float
1.
Connect the plug to the mains and/or turn on the switch: the unit starts.
2.
With the unit in operation, check that the liquid is actually being pumped and that there is
no:
•
Leaking of fluid from the piping
•
Abnormal noise or vibration
•
Vortex nearby the suction port.
3.
Once the unit has taken up liquid to the minimum level, disconnect the plug from the mains
and/or turn off the switch to switch it off.
