2 Gallon SS
Water Booster System
45
50
55
60
65
70
75
80
85
90
95
1
6
11
16
21
26
31
36
41
46
51
56
Pr
es
su
re
(p
si
)
Time (sec.)
System Performance tested with 60 psi pre charge
and 30 psi city water pressure
2 oz
6 oz
8 oz
4 oz
PERFORMANCE FOR AC MODELS
SYSTEM PERFORMANCE SPECIFICATIONS
INSTALLATION & SERVICE INFORMATION (115 & 230 VOLTS AC)
PUMP PERFORMANCE SPECIFICATIONS
Pump Design: Motor-operated 3 chamber diaphragm
Motor:
Permanent magnet
Wetted Parts:
Diaphragm
Santoprene
TM
Check valve
EPDM
Pump Housing
Nylon
Accumulator Tank:
Housing
304 stainless Steel
Bladder
Butyl (food grade)
System Weight:
17.5 lb (7.9 kg)
Max Amp Draw:
115V AC
0.9 amp
230V AC
0.5 amp
Cycle
50/60 Hz
Liquid Temp:
Min: 40° F (5° C)
Max: 120° F (49° C)
Priming:
Dry
6 feet (1.9 m)
Wet
10 feet (3.1m)
Max Flow:
1.5 GPM (5.7 LPM)
Max Discharge Pressure:
87 psi (6 bar)
Max Inlet Pressure:
30 psi (2.1 bar)
• Highest capacity for its size
•
Ultimate performance and reliability, with extended
service life
•
Over 100% increase in draw-down volume vs
competitive models
• Replaceable bladder
SPECIAL FEATURES
APPLICATIONS
Provides constant pressure water supply to:
• Carbonators;
• Ice makers;
• Pure water dispensing machines;
• Non-carbonated drink dispensing valves;
• Coffee/tea brewers;
• FCB/frozen drink machines;
• Moist-heat food holding cabinets
GENERAL SAFETY INFORMATION
Protect yourself and others by observing all safety
information. Shut off power and drain pressure from
system prior to service.
DESCRIPTION
FLOJET 2 Gallon SS Water Booster System is designed
to provide a constant water pressure of up to 87 psi (6
bar) and a maximum flow rate of 1.5 gpm (5.7
lpm) at
10 psi (0.7 bar). The pump is fully automatic, with an
integral pressure switch and check-valve to maintain
system pressure and will supply a smooth water flow at
various requirement levels.
COMPONENT
CERTIFICATIONS
Model
Voltage
Certification
02830000A
115 VAC
NSF
R
*NSF Standard 18 Pump, Standard 61 Tank
2830001A
230 VAC
NSF
