XCPC-9200
12
Main Features
PCI Bus interface
The XCPC-9200 uses the PLX-6540 bridge for the PCI-X bus interface to the cPCI bus. The
bridge has the following features:
•
PCI R2.3 capable
•
PICMG 2.1 Hot swappable
•
PCIX 64-bit, 33MHz to 133Mhz PCI clock speed
•
Asynchronous operation across the primary (Compact PCI backplane) and secondary
(PMC sites) interfaces. This allows the two interfaces to run at two different speeds.
•
10KB FIFO
•
Transparent mode operation.
•
Support for 8 Bus Masters
Specifications
The following table is the XCPC-9200 Specifications, showing the recommended operating conditions.
Condition
Recommendation
Compliance
PCI R2.3, PICMG 2.0, PICMG 2.1,
Air Flow
200LFM with no PrPMC/PMC installed (air flow is mostly
driven by the PMC requirements)
Power
Each PMC site is capable of sourcing 25 watts of power;
the carrier alone requires 2 watts.
Dimensions
Height-233 mm, Depth- 160 mm, Width – 20.27 mm
Operating Temperature
-40 to 85° C
Storage Temperature
-55 to 105° C
Relative Humidity
5-95% Non-Condensing
Shock
40g
Vibration
Vibration Class: V3
MTBF
189,000 hrs
Safety:
Design to meet or exceed UL 60950 3rd Ed.; CSA C22.2 No.60950-00; EN60950; IEC 60950-a
EMC
:
Design to meet or exceed FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024
Warranty: 2 year limited
