Quick Start Guide of Network Video Recorder
16
Recording
Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to
the user manual for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record.
And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.
Instant Recording
On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the
window when you click on it.
Click the
icon to enable the record, and the icon turns to
. And click
icon to disable the record,
then the icon turns to
.
All-day Recording
Steps:
1.
On the live view window, right lick the window and move the cursor to the
Start Recording
option, and
select
Continuous Record
or
Motion Detection Record
on your demand.
2.
And click the
Yes
button in the popup Attention message box to confirm the settings.
Then all the channels will start to record in the selected mode.
Playback
Play back the record files of a specific channel in the live view menu. Channel switch is supported.
Option 1:
Choose a channel under live view using the mouse and click the
button in the shortcut operation menu.
Only record files recorded during the past five minutes on this channel will be played back.
