Charging Guidelines
1. Place the unit on the charging base properly.
2. Plug the USB charging cable into a USB power
adapter or other power sources.
The indicators will light during charging:
Battery Status Indicator
Remaining Battery Level
Green
10%-100%
Red
>10%
Powering off after flashing
0%
red 3 times
Cleaning and Maintenance
It is normal and harmless if there are water residues in the product after
shipping, as each device has been tested with water be for e shipping.
Nozzle
Rinse with water and wipe dry with a soft cloth.
It is recommended to change the nozzle every 6 months.
If the nozzle is deformed, please replace with a new one.
Reservoir and Suction Hose
Empty any remaining water from the reservoir after use.
Remove the limescale in the reservoir with warm water less than 40 °C and
wipe dry before replacing.
Main Device Body
Wipe the surface clean with a cleaning cloth and wipe dry.
Do not use diluter, gasoline and alcohol.
Do not immerse the unit in water to clean.
Do not clean with water warmer than 104 °F.
Troubleshooting
Trouble
Possible Cause
Solution
The
Low battery
Fully charge the
device
power
device for 3 hour
can not
be turned
Circuit
Contact customer
on.
failure
service for help.
The water hose
The water hose
in the reservoir
should be properly
is not in contact
installed and be
The
with water.
immersed in water.
device
Built-in 2-
Re-start the
stops
operation.
minute timer
device.
Low battery
Fully charge the
device for 13-14
power
hours.
Water ejection
Follow the water
diversion tips in
No water
valve is too dry.
the user manual to
wet the valve.
ejected
from the
The water hose
The water hose
device.
in the reservoir
should be properly
is not in contact
installed and be
with water.
immersed in water.
Low
Replace with
water
new nozzle.
pressure
29
30
