4
Download and install the XVTEC managment
tool from:
https://www.xvtec.com/support/downloads
on a Windows-based OS.
Refer to the user guide for the next steps.
Download the user guide from:
10
To access and configure the XVC-ULTRA
using the web-based user interface, enter the
IP address of the encoder unit in the address
bar of the browser.
7
The main page of the Configuration System
appears in the browser window.
9
Sign in by entering your user name and
password in the dialog box displayed by your
browser. A sample dialog box appears in the
figure below.
The default credentials are:
Username: admin
Password: admin
8
Execute the XVTEC Management Tool . The
application discovers the devices in your
network, and displays them as a list.
You may need to disable Windows Firewall to
enable discovery.
5
Find the row in the table associated with
your encoder. Right-click on the row, and
select "Set IP". The Set Device IP dialog box
appears.
Select "Static" or "DHCP" IP configuration.
If “Static” is selected, enter the encoder’s IP
Address, Subnet Mask, and Default Gateway
settings. Click Apply to save the new settings.
6
Power on the system by connecting the
power supply to the input power connector
(Note, the power supply is provided with a
locking connector).
3
STAT
ACT
LCK
PWR
HDMI IN
LINE IN
SW
ETH
RS-232/485
USB
12V DC
https://xvtec.com/wp-content/downloads/XVC_Ultra_
HDMI_Encoder/XVC-ULTRA-User-Guide.pdf
V1