XSD27ZIR
23
<Record>
Select to Record a pattern. The following menu will pop
up.
The user can operate the dome with pan/tilt/zoom
movements as needed. The system will record the
pattern of movement. To end recording user can call
preset 1 to confirm and save the recording.
<Test>
Select to Test the recorded pattern
<Run>
Select to run the Pattern until another command is
received
<Back>
Select to go back to the upper level menu
■
ZONE
<Main Menu>
<Auto Running>
<Zone>
Zone Number: 001
Title: 000000000000000
Left Limit
Right Limit
Remove Current
Pan Speed
：
001
Run
Back
A zone is an area between two points. The user can set
a zone and scan it automatically.
<Zone> is similar to <Cruise> except that the user can
assign a title for a ZONE. Whenever the camera moves
into the zone, the title will display on the screen to alert
the operator.
NOTE: Camera scans horizontally only. User can set up
to 8 zones.
<Zone Number>
Displays current zone number. Values can range from
001~008. Move the joystick right then up or down to
select desired value.
<Title>
Select to set the zone title.
<Left Limit> / <Right Limit>
Set the position of the first and second point. The
following menu will pop up:
Call Preset 1 To
Confirm…
Move to the desired point and call preset 1 to confirm.
<Pan Speed>
Select to set the pan speed (camera movement speed).
Values can range from 001 to 255, the greater number
represents the higher speed. Move the joystick right to
select, then up or down to change value.
<Run>
Select to start scanning the current zone set.
<Back>
Select to go back to the upper level menu
■
PARK TIME
<Main Menu>
<Auto Running>
<Park Time>
This function lets the system automatically run an
assigned function after a specific period of idle time.
For example: if the dome is running a tour and an
operator breaks the tour to do other work, the dome
can automatically carry on the tour within a period of
time after the operator stops the break.
Park time is a period of idle time without any operation.
[
Off
]: Disable this function.
[
001~255
]: Auto runs the <Park Action> after this
number of seconds of idle time.
■
PARK ACTION
<Main Menu>
<Auto Running>
<Park Action>
Park action refers to the function that system will
automatically run when ‘park time’ is up.
[
Off
] Disable this function
[
Pre 001~220
] Call preset 001~220
[
Scan 001~004
] Run auto scan 001~004
[
Tour 001~004
] Run tour 001~004
[
Pat 001~004
] Run pattern 001~004
Preset
Tour
Pattern
Cruise
Zone
Park Time: 010
Park Action: Pat 001
Back
In this example, the system will run Preset 8 after 38
seconds of ‘idle’ time.
Call Preset 1 To
Confirm…
X/100
Record……..
Содержание XSD27ZIR
Страница 13: ...XSD27ZIR 13 SYSTEM CONNECTION ...
Страница 35: ...XSD27ZIR 35 ...
