8
Connect the DVR via the Remote Software
Setup Requirements:
•
Make sure the PC is connected to the Internet.
•
Obtain IP address of the
Premium H.264 DVR
. To check the DVR’s IP address, press
MENU
key on the unit and select <
System Setup
>
<
Network Setup
>
<
LAN Setup
>
<
IP
> to
check the IP.
Changing Internet Setting:
•
Start the IE; select <
Tools
> from the main menu of the browser, then <
Internet Options
> and
then click the <
Security
> tab.
•
Select <
Trusted Sites
> and click <
Sites
> to specify its security setting.
•
Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of the
unit in field and click <
Add
> to add this website to the zone.
•
In the Security Level area, click <
Custom Level
>. Under <
ActiveX controls and plug-ins
>,
set all items to <
Enable
> or <
Prompt
>.
•
Click <
OK
> to accept the settings and close the <
Security Settings
> screen.
Using the Remote Software:
•
Start the IE and enter the IP address of the
Premium H.264 DVR
in the address bar.
•
The ActiveX controls and plug-ins dialog will show up twice for confirmation; click <
YES
> to
accept ActiveX plug-ins. The DVR
Remote
plug-ins will be downloaded and installed on the PC
automatically when the connection is successfully made.
NOTE:
Do not enter any leading “0” characters in the address, for example,
“192.068.080.006” should be entered “192.68.80.6”.
NOTE:
If the default trigger port 80 is changed into another one, take port 81 for
example, users should enter the IP address as “192.68.80.6:81”.
•
Version verification starts automatically to verify whether DVR
Remote
was installed. This
process may take up to 30 seconds.
•
When the software is completely downloaded and installed, the Login Screen is displayed.
•
Enter username and password. The default username and password is
admin
and
1234
.
