26
POWER UP
：
1
PARAMTER
：
OFF
BACK
EXIT
Move the cursor to PRIVACY NO, please use left/right key to set different privacy zones.
For example, shift to 001 section and then move the cursor to ACTIVATE.
Secondly, use left/right key to select ON mode. Now there is a privacy zone in the screen centre.
Thirdly, use PTZ to move camera so that privacy object fit well with screen centre.
Fourthly, move the cursor to RESIZE and then click left and right key to adjust privacy zone direction and
size.
Fifthly, move the cursor to SAVE and then click confirm button to exit.
PRIVACY NO
：
Here is to set privacy mask zones. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set. The value ranges from 1 to 24.
Please note the value here may
vary due to different protocols.
ACTIVATE: There are two settings: on and off. When activate function is on, the privacy mask function
will be activated and displays in the screen. When activate function is off, the privacy mask function will
be closed and the blank will not displayed in the screen.
RESIZE
：
It is to adjust the privacy zone size. Please continue pressing direction button to widen or
narrow zone
size. ← is to narrow the horizontal width and → is to widen the horizontal width. ↑ is to
widen vertical height
and ↓ is to narrow the vertical height.
SAVE
：
Here is to save user setup.
DELETE: Here is to delete setup and restore default setting.
BACK: Go back to previous menu.
EXIT: Log out system menu.
Power Up
Move the cursor to the POWER UP item and then click the confirm button, you can go to the fourth
menu.
POWER UP: It is to set the PTZ operation when the speed dome boots up. The option includes:
NONE/AUTO/SCAN/PRESET/PATTERN/TOUR and etc. Please use the left/right button to set.
PARAMTER: Here you can set the serial number of the corresponding op eration such as the scan,
preset, pattern, tour. Please use the left/right button to set.
BACK: Go back to the previous menu.
EXIT: Log out the system menu.
M enu Password
Move the cursor to the MENU PASSWORD and the click the confirm button to go to th e fourth menu.
PASSWORD
：
SETTING
：
BACK
EXIT
PASSWORD
：
1
2 3 4 5
6
7 8 9 0
→ SAVE BACK
