STEP 4: Set the proper image by moving the camera body (some model
types limit the PCB board to 180° rotational adjustment) and set
the focus by turning the lens either to the left or to the right.
When the camera is correctly focused, rotate the dome housing
clockwise to secure it to the mounting base.
STEP 5: Lock the dome by using the countersunk head screw supplied.
1. Connect the video output to the monitor or other video device through
a 75 Ohms type coaxial cable.
2. Connect the DC jack with the power source.
Description
Package Contents
Installation
How to Operate
THANK YOU VERY MUCH FOR PURCHASING OUR PRODUCT
The XIR501 colour dome camera is designed for medium to high risk applications. It
offers very high resolution 480 TVL images from its Sony 1/3" Super HAD CCD
sensor and will provide images in complete darkness up to 15 metres and beyond
15 metres in light levels above 0.1 lux. The camera is designed for internal use and
ceiling mounting.
1. Instruction Manual
2. XIR501 Dome Camera
3. Plastic Bag- containing
4. 4x Bracket mounting screws
5. Countersunk Head Screw
STEP 1: Select a suitable position on the wall or ceiling to install the
camera.
STEP 2: Rotate the dome housing counterclockwise to remove it from
the mounting base (as shown in the figure below).
Note! The inner parts may differ depending on the camera model type.
STEP 3: Place the mounting base onto the ceiling and centre over the
mounting hole, using the four retaining screws for the bracket
(A) supplied in the accessories package (shown in the figure
below).
Main Features
•
Dual mode High Resolution CCD sensor provides very good quality Colour images
in low light conditions of 0.1 lux or above and B/W images in low light conditions
below 0.1 lux and in complete darkness.
•
Integrated Long Life Infra Red LEDs turn on automatically when the camera
switches to B/W mode and provide up to 15 metres night vision
•
Tamper resistant and easy to clean as all moving parts are behind the dome cover
•
Sony 1/3" Super HAD CCD image sensor for 480 TVL resolution images and 0.1
lux low light sensitivity
•
Xvision IXC1DN Digital Signal Processing (DSP) chip which has been optimised
for internal viewing and features Automatic Gain Control, Automatic Electronic
Iris, Auto White Balance, Back Light Compensation, Low Smear, Edge
Enhancement, Zero Colour Rolling and Day/Night
•
3.6mm focus free lens for a 78° viewing angle
