X v i s i o n . c o m P a g e
12 | 30
Function settings
Set/call preset
Presets are defined points you can set on the PTZ camera, These PTZ IR
dome camera supports 255 presets.
Set preset position
Move the PTZ IR dome to the required position you would like to set
(remember). You can use the Controller or the DVR for this. You can also
zoom in or out and this will be remembered.
Depending on your method of controlling the PTZ IR dome camera you will
find different buttons.
Press the key “set preset/Set”
Enter “1” or the required Preset number you wish.
P
ress the key “enter” to save the preset.
Call preset
Press the key
“call preset position or Preset”
Then press the required preset number
“1”
Click
“Enter” This will move your PTZ camera to the stored preset
location.
Calling Tours/Cruise
Tours/Cruise enable you to set a defined group of presets and initialise
the tour of the group of presets. There are 8 auto tours/cruise routes for
the PTZ dome camera
，
Each tour line can store up to 5 presets minimum
and a maximum of 30 presets.
