7
Using Remote Software
Setup Requirements:
•
Network connection to PC.
•
IP address of your
XDVR2
series DVR. To check the DVR’s IP address, press
MENU
key on the
unit and enter password to access OSD Main menu; select <
System Setup
>, <
Network
Setup
>, then <
LAN Setup
> to check the IP.
Changing Internet Setting:
•
Start the IE; select <
Tools
> from the main menu of the browser, then <
Internet Options
> and
then click the <
Security
> tab.
•
Select
<
Trusted sites
> and click <
Sites
> to specify its security setting.
•
Disable Require server verification (https:) for all sites in this zone. Type the IP address of the
unit in field and click <
Add
> to add this website to the zone.
•
In the Security Level area, click <
Custom Level
>. Under <
All ActiveX controls and plug-ins
>,
set all items to <
Enable
> or <
Prompt
>.
•
Click
<
OK
> to accept the settings and close the <
Security
> screen.
Using the Remote Software:
•
Start the IE and enter the IP address of your
XDVR2
series DVR in the address field.
•
The ActiveX controls and plug-ins dialog will show twice for confirmation, click <
YES
> to accept
ActiveX plug-ins. The DVR Remote plug-ins will be downloaded and installed on your PC
automatically when the connection is successfully made.
NOTE:
Do not enter any leading 0 characters in the address, for example,
“192.068.080.006” should be entered “192.68.80.6”.
NOTE:
If the default trigger port 80 is changed into another one, port 81 for example, you
should enter the IP address as “192.68.80.6:81”.
•
Version verification starts automatically to verify whether DVR Remote was installed. This
process may take up to 30 seconds.
•
When the software is completely downloaded, the Login Screen is displayed.
•
Enter your username and password. The default usernames and passwords are admin: 1234,
user: 4321.