XC960VA
HD
960H
5
www.xvision.com
1. Product Overview
2. Installation
The XC960VA camera can be wall or ceiling mounted. To install the camera on the ceiling or wall, please
follow the steps below.
3. Next, remove the base from the camera by
unscrewing away from the main part of the
camera. You will need a cross head scew driver to
do this.
1. Use the stencil to drill holes for the camera to be
mounted.
4. Then, place the screws through the holes in the
base of the camera and screw in.
2. Make sure you use the correct drill bit for the
wall/ceiling drilling into. Then when drilled, insert
wall plugs.
5. Now, screw the main camera bracket back on to
the camera base.
6. Adjust the the angle of the lens to gain the
desired view.
7. Lastly, screw the dome cover back onto the
camera using the allen key.
6. You can adjust the angle 180° in any directions
using the magnetic base (below).
