Network Video Server F Series Web Operation Manual
58
10.
Now you need to define the definition of the server's IP in IP-device able to access this service DDNS. To
get DDNS service, you need to have a computer connected to the Internet on the same network with device.
Then please type the command dynupdate. no ping-ip.com at the command prompt, Windows ®. The
server's IP will be displayed on the screen. See Figure 8-10. Your device can use this IP to find the No-IP
server.
Figure 8-10
11.
Please go to the device and access the MAIN MENU> SETTING> NETWORK> DDNS. Input server IP you
get in the above step. Select the DDNS Type as No-IP DDNS and highlight the icon
in front of Enable to
enable the DDNS function. Now fill the fields as described below, and click OK to save current setup.
• Server IP:
Enter the IP noted in step 10.
• Port:
Enter the port 80.
• Domain Name:
Enter the domain name created in step 8.
• User:
Enter your username (email address) created in step 3.
•
Password
: Enter the password created in step 3.
12.
Now you have completed device setup. Open Internet Explorer ® in another foreign network with Internet
access, unlike the network where the device is connected to, you need to follow the steps listed below:
1. Enter the address into your browser: http://nome the field created in step 8. For example:
http://vd16s480st.no-ip.biz
2. If the device HTTP port is 80, just type the domain name. Otherwise, enter in the browser address as:
http://nome the field created in Step 8: port number of HTTP. For example:
http://vd16s480st.no-ip.biz:9090
3. Press Enter. The system will ask install application webrec.cab control or not. Please click Yes to perform
a successful connection.
