4. Adjust the camera viewing angle by first
tilting (STEP 1) then rotating the camera
module (STEP 2), and then turn the
horizontal adjustment ring (STEP 3) to
correct the image and achieve the required orientation (as shown in
Figure 2).
5. Place the dome cover on the camera and tighten it by turning it
clockwise.
Camera
Module
Horizontal
Adjustment
Ring
Top
Top
To
p
Ti
lt
Rotate
Rotate
4
Figure 2
1. Select a suitable position on the wall or
ceiling to install the camera.
2. Rotate the dome cover by unscrewing
it counterclockwise to remove it from
the camera base.
3. Secure the camera in the desired
position with the three fixing screws
(as shown in Figure 1).
4. Installation
Figure 1
