1.) Side A: Yellow green are RF2.4G work lights.
2.) Side A: Red is the BLE work indicator. The remote control BLE is coded, press the
button to light up, and release to turn off. Turn on the voice function, the BLE
indicator lights up, and turns off when it is off.
3.) Side B: Fn indicator light. In the Fn state, the indicator light is always on, and the
non-Fn status is off.
4.) Side B: Caps LK indicator, upper and lower case indication. Lit, uppercase output;
no light, lowercase output.
9.working status description:
1.) RF2.4G part: After the Power button is released, 15s goes to sleep.
2.) BLE part: Power on without pairing status, A side work indicator flashes 3 times
and then goes out, the remote goes to sleep; there is pairing information but no
connection when power is on, A side work indicator flashes 3 times and then goes
out, The remote will send back the chain request. If the chain fails, the remote goes
to sleep; if there is a connection, release the button and immediately enter standby
(low power consumption). After no operation for 5 minutes, the remote control goes
to sleep and disconnects the Bluetooth.
When the Fn state and the flying mouse state are turned on, there is no operation
within 15 seconds to exit the current state and enter standby.
10.Remote control artwork:
