XUANBAO XTC990A, Руководство пользователя

Страница: 16 / 22

15
7) Rotate turntable clockwise until installing inside rim.
7.4.3 Outside tire installment
1) If the sensor is attached to tire, Put it
in (fig AC) position which opposite
dismounting head.
2) If there are color signs on the tire,
make them suitable for sensor.
“ ! ” warning :
If the sensor is not
attached to tire , make color signs match tire inflating entrance.
3) Adjust hexangular rod to rim away
from 1mm,and fix by lock-screw. Install
round rod to straight arm (fig AD), and
adjust the rod to rim away from 1mm,
and fix by lock-screw. And move elbow
to the rim edge away from 1mm, which
shapes three points to press.(fig AC)
“ ! ” warning :
Protect your hands from presser when operates.
4) Rotate the turntable clockwise, hexangular rod and rod roll in pointed position,
and make the outside tire go into rim..Elbow presser rotates following rim, and
then installment finish.