background image

4

Introduction

Introduction

Congratulations on your purchase of an XTZ subwoofer. This product represents 

the state of the art in subwoofer performance and will provide you with years of 

listening pleasure when properly setup and cared for. We strongly urge you to 

read this owner’s manual and follow the instructions provided to help you attain 

maximum system performance.

If you have no previous experience of these kinds of installations, or if you have 

any questions, feel free to contact our free of charge support and we will help you. 

(See further under the heading of Support on the last page of this manual).

Prior to installation

Please unpack the system carefully. Use caution when lifting or moving to avoid 

injury. Save the carton and all packaging materials for future use. Packing this unit 

in any other carton may result in damage when shipping that is not covered by the 

warranty. Fill out and return the warranty card to complete your product registration 

and record the serial number and purchase information in the space provided for 

your own records.

Operating 

environment

Operating environment temperature 40°F to 95°F (4°C to 35°C) with less than 

85% relative humidity. Do not install this product in a poorly ventilated area, or in 

locations exposed to high humidity, direct sunlight, or strong artificial light.

Warning!

This equipment is not waterproof. To prevent a fire or shock hazard, do not expose 

this equipment to rain, moisture or any liquids. Do not place a container filled with 

liquid on or near this equipment (such as a drink or flower vase). To prevent a fire 

hazard, do not place an open flame (such as a lighted candle) on this product. 

Please observe all warnings on the equipment itself. There are no user serviceable 

parts inside. Please refer all service questions to your authorized dealer.

About XTZ

Philosophy

Our reference and starting point is to recreate a natural sound, but also in respect 

to the fact that acoustics and sound always is a matter of taste.

XTZ Goals

To provide the optimal relation between price, performance and quality on the 

market.

Our concept: 

- To produce the perfect compromise.

- Cost-effective manufacturing at a large scale.

- The quality of our products is more important than the marketing.

- Reduce the number of intermediaries.

Contact us

Website: www.xtz.se / www.xtzsound.com

E-mail: [email protected]

Содержание SUB 12.17




















Отзывы: