- 8 -
Mounting and connecting tips
Mounting options
Normally 95.44/95.24/95.22 is placed near a wall.
The wall behind affects the reproduction of the
speaker and characteristics. Please take your time
to try out the best placement.
95.33 is normally placed below the movie screen or
TV. This effect the sound in the same way as above.
Spikes
The XTZ 95.44 is equipped with rubber feet,
intended for vibration-muffling, making the use of
spikes unnecessary.
95.33/95.24/95.22 have no rubber feet
Correct phase when
connecting
Always make sure the speaker is connected in
respect of the correct phase. The + terminal of the
amplifier should be connected to the + terminal of
the speaker.
If the speaker is incorrectly connected to
the amplifier, there is no risk of damage or
danger. However, the sound will not be
reproduced correctly.
Overloading
After playing at a very high sound level for a
prolonged period of time there is a risk of
damaging the speakers and/or the amplifier.
Initial use of your
speakers
The drivers of a loadspeaker require about 50 to
100 hours of use before the full quality level is
reached. During this time the speaker can be used
normally.
