- 8 -
Mounting and connecting tips
Mounting options
The wall behind affects the reproduction of
the speaker and characteristics. Please take
your time to try out the best placement.
Spikes
The XTZ 80.1 FRONT is equipped with rubber
feet, intended for vibration-muffling, making
the use of spikes unnecessary.
.
Correct phase when
connecting
Always make sure the speaker is connected in
respect of the correct phase. The + terminal of
the amplifier should be connected to the +
terminal of the speaker.
If the speaker is incorrectly
connected to the amplifier, there is
no risk of damage or danger.
However, the sound will not be
reproduced correctly.
Overloading
After playing at a very high sound level for a
prolonged period of time there is a risk of
damaging the speakers and/or the amplifier.
Initial use of your
speakers
The drivers of a loadspeaker require about 50
to 100 hours of use before the full quality level
is reached. During this time the speaker can
be used normally.
