17
Operation
Image Freeze
Call Preset 28 to turn on/off the function. When it is on, during a regular preset call (see following
picture), the video will be frozen at point A till Point B. At Point B, the video will be displayed
normally.
Fig. 10: Image Freeze
Defogging
Call Preset 37 to turn on the function. There will be “DEFOGGING” flashing at top of the screen.
When the fog is cleared, turn off the function in time in case the camera temperature is getting too
high.
Call Preset 38 to turn off the function. The “DEFOGGING” at top of the screen will disappear from
the screen.
If the defogger is on, once temperature inside the camera r55 degree, the defogger will be
turned off automatically;
If the defogger is off, once temperature inside the camera is lower than +10 degree, the defogger
will be turned on automatically.
Soft Address
The camera address can be changed via presets 62 and 63. The new address will take effect after
[Note]
When the ambient temperature is above +50
℃
, the aux lighting system is suggested
to be turned off to protect the PTZ cameras.
