20
19
Troubleshooting
If you have problems operating this product, refer to this section. The most common
problems are listed below, along with likely causes and solutions.
No power
-
Car engine has not been started. Start the car engine.
-
Incorrect wiring connection. Check the wiring.
-
Fuse has been damaged. Replace fuse.
No sound
-
Volume is too low. Adjust volume.
-
Incorrect wiring connection. Check the
-
Parking brake wire connect is incorrect. Check the parking wiring.
Disc does not play
-
The disc is inserted upside down. Insert the disc with the label upward.
-
The disc is dirty. Clean the disc.
-
The disc is cracked or otherwise damaged. Insert a normal, round disc.
-
The files on the discs are in an irregular file format. Check the file format.
-
The disc format cannot be played back. Replace the disc.
-
The loaded disc is a type this product cannot play. Check what type of disc it is.
The screen is covered by a caution message and the video cannot be shown
-
The parking brake lead is not connected or applied. Connect the parking brake lead correctly,
and apply the parking brake.
-
The parking brake interlock is activated. Park your vehicle in a safe place and apply the parking
brake.
Image flashes or distorted
-
Video DVD settings do not match with the DVD. Adjust video DVD settings.
-
Video connection is incorrect.
Noise in broadcasts
-
Signals are too weak. Select other stations with stronger signals.
-
Check the connection of the vehicle antenna.
-
Change broadcast from stereo to mono.
Preset station lost
-
Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live.
The iPod/iPhone’s video image is disturbed
-
Set the TV Signal settings (NTSC/PAL) of the iPod/iPhone correctly.
The paired mobile phone connects and disconnects constantly
-
The Bluetooth reception is poor. Move the mobile phone closer to the product or remove any
obstacle between the mobile phone and the product.
-
Some mobile phones may connect and disconnect constantly when you make or end calls. This
does not indicate any malfunction of the product.
-
For some mobile phones, the Bluetooth connection may be deactivated automatically as a
power-saving feature. This does not indicate any malfunction of the product.
No image
