Xtrons D711G, Руководство пользователя

Страница: 1 / 32

1
Acknowledgement
！
Thank you for purchasing our car DVD player! In order to use this system properly, please
read this manual before using it. Keep this manual for the future reference.
1. Warning:
Keep the disc entry clean. You should clean it immediately if there is dust. Disc with dust
must be cleaned by clean soft cloth before putting into the machine, otherwise, the dust will
be taken into the machine together with the disc from the entry, which may influence the
drive of the machine, and cause the entrance problems of the disc. The dust may dirty the
laser head resulting in the poor read or failed read of the disc.
Notes for installation
This DVD play is designed for operation on 12V-14V DC negative ground system only.
Make sure your car is fit for this negative ground system before installing the DVD.
Remove the [-] power supply of the battery ground wire before installing this DVD, so as to
decrease the rate of damaging the machine because of short circuit.
Follow the wire color on the installation manual to connect the line. Wrong connection may
cause the machine malfunctions or damage the car electrical system.
Lead wire ( - ) of speaker must connect to the ( - ) terminal of the speaker. Do not connect it
to the car or other lines.
Do not block the vent or louver board to avoid the fire caused by the overheating inside the
machine.
When you start to use the DVD after the installation completed (Including after you have
changed the battery), you should use a small round tool to press the RES button on the panel
to restore the system to the initial settings.