PUSH
SET UP / ENTER
DOWN
UP
RIGHT
LEFT
Extra Service Preview
Video output
6PIN DIN CONNECTING PLUG
DIN port
AUX CAP
OPEN
[PIC 2]
[PIC 1]
1. ZOOM/FOCUS ADJUST MENT
2.CAMERA OSD SETTING
Camera setting
“L”wrench
Anchor
Fixing Screw
Camera installation
1. Make desired viewing angle by using
Focus/Zoom adjustment tool clockwise
or conunter clockwise as [PIC 1]
1. According to [PIC 2], open AUX CAP and connect 6pin DIN connector to DIN port
2. If necessary, change OSD setting for desired performance, with the remote
controller
* The extra service preview video out put can be used for installation with the
Portable monitor. ( For the camera setting, please check the OSD manyal)
3. After changing OSD setting, put AUX CAP into hole completely
* Make sure DAY/NIGHT OSD MENU at AUTO.
* Do not reset OSD setting, if done, be sure at AUTO.
Video Jack
(BNC/RCA)
Cable Jack Setting
Video Signal
Video GND
Video Jack
DC/AC Switched
Without
Nega(-)/Posi(+)
1. On the ceiling(or wall), make the hole for Anchor and put the Anchor into
the hole completely.
Use Fixing Screw to settle (Anchor size :
Φ
7 / Lengh 35mm)
2. After settle the Bracket Base, use “L”wrench to settle the Camera Body
and Bracket Head
Zoom
Focus
Camera bass
Wall mountbase
Camera guard
Termial
Block
OSD I
ZOOM
REMOTE CONTROLLER
PUSH
SELECT MENU
UP
TELE
RIGHT
NEAR
LEFT
FAR
DOWN
WIDE
Содержание EMXN1030
Страница 1: ...EMXN1030 Manual V1 3...