PRODUCT INFORMATION
5
INSTALLATION
• The standby switch located at the center right hand side of the fire must be first switch on.
• It takes some time for the receiver to respond to the transmitter. Do not
PRESS
the buttons more than once
within two seconds for correct operation.
• Press once the button
ON/OFF
on the remote control this turns
ON/OFF
the appliance and fire effect.
• Pres
s the
DIMMER
button for operates the dimmer mode. Each time the dimmer button is Pressed, the intensity
of the flame decrease. There are 5 brightness levels you can cycle through and the
OFF
setting.
• Press once t
he
HEAT
button for the low heat setting(750W); press twice for the high heat setting (1500W);
press again to turn off the heater.
• Tem
perature setting. The highest temperature of the thermostat is 82F. There are several thermostat levels you
can cycle through between 62F and 82F, and the
OFF
settings.
• Timer setting. Press
the
TIMER
button to cycle through the timer settings (1Hour, 2H, 3H, 4H, 5H, 6H, 7H and
8H) and the
OFF
setting.
• Colorful Setting. Press the remotes’ Colorful button, it can change the flame color. Press the first time, it will
change from
AMBER
color to Blue color. Press the second Time, it will change from Blue to
AMBER & BLUE
color. Press the third time, it willCome back to amber color.
REMOTE CONTROL
Remote control requires two
AAA batteries
6
