COLLECTOR REPAIR
IF A COLLECTOR DEVELOPS A LEAK
If a leak develops for any other reason, you may use the repair method shown.
The collectors are not warranted against freeze damage.
SOLAR COLLECTOR REPAIR
This method allows for an easy and permanent, on-site repair of a collector by
isolating the leading riser tube. Referring to the figure at the right, locate the
tube to be isolated. (End tube has been shown for clarity). Using a sharp
utility
knife, very carefully cut away approximately 1" of the tube at both
headers.
Drive a #10 sheet metal screw, preferably stainless, into the
hole in the header.
The screw must be between 1/2" and 3/4" long.
DO NOT OVERTIGHTEN!
If the screw strips out, or if the repair leaks,
use a #12 screw. This repair method will not void the collector warranty.
With proper care and winterization, you will enjoy your solar collectors for many
years.
8
