CARING FOR YOUR POOL CLEANER
ADJUST THE TIRE BUMPER HEIGHT IF YOU NEED TO
If the user wants to focus on cleaning the pool wall, after adjusting the flow through the cleaner
according to the pool wall area marked by the flowmeter (see the tip on page 9), the bumper on the
tire can be cut off according to the position of the secant groove, so that the machine tire can gain
more friction and prevent slipping (see figure 9 ).
Figure
9
Before the cut
After the cut
REPLACING TIRES
If your tires are worn to the point where the indentations are barely visible or they are no longer able to gain
traction, it is time to replace the tires.
Tires
can wear after prolonged use or from running
Cleaner
in a pool with a
rough surface. See Figure1 O.
Note:
Using your
Cleaner
with worn tires may damage the surface of the pool. The
Tire Bumper
must be removed
prior to replacing the
Tire.
To change the tires on your cleaner:
1. Turn the pool pump off and remove
Cleaner
from the pool.
2. Disconnect the cleaner from the hose.
3.
Place
Cleaner
on a flat work surface and, gently pull the tires out of the hub frame of the cleaner wheel
until it leaves the hub frame.
4. Put on new tires.
5. Reverse the process to reassemble your
Cleaner.
Figure
10
10
