XtremepowerUS 75029 Скачать руководство пользователя страница 4

SAFETY WARNINGS / ASSEMBLY

ASSEMLY / OPERATION

SAVE THESE WARNINGS.

1

2

Set up your solar shower in a place that is exposed to direct sunlight as long as possible.
1.

Connect the shower head to shower body tube. Do not use a wrench. Secure the gasket.

2.

Mo

unt the shower base to concrete slab or wood base with four bolts, nuts and gaskets. Use a wrench for

this process.

3.

Connect the footwash to the shower.

4.

Put an O

-ring on the slot of the lower tube. Lift the shower upper tube on to the lower tube. Turn the locking

ring clockwise to securely connect the upper tube to the lower tube.

NOTE

: The handle and shower head need to face in the same direction.

5.

Connect the hose adaptor to the inlet of the shower, then connect the garden hose to the hose adaptor and

water supply.

OPERATION

FIRST USE

1.

Turn the shower handle to the ON HOT position.

NOTE

: Filling the tube with the valve in the hot position ensures no air pockets are trapped in shower.

This procedure is for first use only.

2.

Turn on the water supply to the garden hose to fill the shower. It will take 5 to 6 minutes to fill up the shower.

3.

Whe

n the water flows from the shower head, turn the shower handle off. Turning the shower handle off 

makes water begin heating in tube.

4.

Depending on sunlight and outside temperature, the shower will take two to three hours to fully heat water.

WARNING

: To avoid scald, always turn the shower handle to the cold water (blue) direction before using the 

shower. Then set to the desired temperature.

WINTERIZATION

1.

Turn off and disconnect the garden hose.

2.

Open the handle to the full on hot position and allow the water to drain from the hose adaptor (about 7 to 8

minutes).

NOTE

: Don’t tough or turn shower handle while draining water, otherwise water will stop draining.

3.

Turn the 

locking ring counterclockwise to separate the upper tube and the lower tube. Unbolt the lower

shower tube and pour the remaining water out of tube.

4.

Clean and dry the shower parts and move shower from outdoors to indoors. Store it in dry and warm place

during winter season.

WARNING

1.

DO NOT USE SALT WATER OR ANTI-FREEZINE METHODS.

2.

WATER PRESSURE: MAX 3.5BARS

3.

ALWAYS START YOUR SHOWER FROM COOL TO AVOID SCALD.

ASSEMBLY

Содержание 75029






Отзывы: