background image

MINI TRACKED DUMPER

4

GB

Protect eyes, face, and head from objects that 
may be thrown from the unit. Always wear 
safety goggles or safety glasses with side 
shields when operating.

Wear appropriate hearing protection.

Always keep hands and feet away from all 
moving parts during operation. Moving parts 
can cut or crush body parts.

Always keep hands and feet away from all 
pinch points.

D o   n o t   t o u c h   p a r t s   t h a t   m i g h t   b e   h o t 
from operation. Allow parts to cool before 
attempting to maintain, adjust, or service.

Stay alert, watch what you are doing, and use 
common sense when operating the machine.

Do not overreach. Do not operate the machine 
while barefoot or when wearing sandals or 
similar lightweight footwear. Wear protective 
footwear that will protect your feet and 
improve your footing on slippery surfaces. 
Keep proper footing and balance at all times. 
This enables better control of the machine in 
unexpected situations.

Inspect Your Machine

Check your machine before starting it. Keep 
guards in place and in working order. Make 
sure all nuts, bolts, etc., are securely tightened.

Never operate the machine when it is in need 
of repair or is in poor mechanical condition. 
Replace damaged, missing, or failed parts 
before using it. Check for fuel leaks. Keep the 
machine in safe working condition.

Do not use the machine if the engine’s switch 
does not turn off the engine when running. 
Any gasoline powered machine that can’t be 
controlled with the engine switch is dangerous 
and must be replaced.

Regularly check to see that keys and adjusting 
wrenches are removed from the machine area 
before starting it. A wrench or a key that is 
left attached to a rotating part of the machine 
may result in personal injury.

Avoid accidental starting. Be sure the engine’s 
switch is off before transporting the machine 
or performing any maintenance or service 

Understand Your Machine

Read this manual and labels affixed to the 
machine to understand its limitations and 
potential hazards. 

Be thoroughly familiar with the controls and 
their proper operation. Know how to stop the 
machine and disengage the controls quickly.

Make sure to read and understand all the 
instructions and safety precautions as outlined 
in the Engine Manufacturer’s manual packed 
separately with your unit. Do not attempt to 
operate the machine until you fully understand 
how to properly operate and maintain the 
engine and konw how to avoid accidental 
injuries and/or property damage.

If the unit is to be used by someone other than 
original purchaser, or is to be loaned, rented, 
or sold, always provide this manual and any 
needed safety training before operation. 
The user can prevent and is responsible 
for accidents or injuries that may occur to 
themselves, to other people, or to property.

Do not force the machine beyond its limits. 
Use the correct machine for your application.

Personal Safety

Do not permit children to operate this machine 
at any time.

Keep children, pets, and other people not 
using the unit away from the work area. Be 
alert and shut off the unit if anyone enters 
work area. Keep children under the watchful 
care of a responsible adult.

Do not operate the machine while under the 
influence of drugs, alcohol, or any medication 
that could affect your ability to use it properly.

Dress properly: Wear long, heavy pants, work 
boots, and work gloves. Do not wear loose 
clothing, short pants, or jewelry of any kind. 
Secure long hair so it is above shoulder level. 
Keep your hair, clothing, and gloves away 
from moving parts. Loose clothes, jewelry, or 
long hair can be caught in moving parts.

SAFETY

General Safety Rules

09715UK00M112_更新回收处理标志_未发排.indd   4

2020/6/29   16:18:27

Содержание 196CC/635HP


























Отзывы: