XtremeAir GmbH, Harzstr.2, D-39444 Hecklingen
Document No.
SB-2013-002
Tel: +49 39267 60999 0, Fax: +49 39267 60999 20
www.xtremeair.de [email protected]
Issue:
A.01
DOA-Nr.: EASA.21J.360
Service Bulletin SB-2013-002
Date: 15.4.2013
Replaces Service Bulletin No. / Date:
Not applicable
Page 8 / 8
61. Install the fuel hoses and the vent hoses to tank cover lh/rh as per Maintenance
Manual 20-10-02.
62. Connect all electrical cable. Install the fuel line cover on the right side with RTV 106.
63. Install the fuel selector linkage (XA42-2840-100).
64. Install the spade arms rh/lh (XA42-5760-121) and the sighting devices (XA42-5770-001).
65. Install the aileron rod rh/lh (XA42-2710-114) to the aileron bellcrank (XA42-2710-050)
in the fuselage in reverse order. Secure the bolt with a new 2x12 splint.
Report the accomplishment of this service bulletin via email taircraft serial number and registration number.
Approval: The technical information contained in this document has been approved under the
authority of EASA Design Organisation Approval no. EASA.21J.360.
Picture 11
Picture 12
