Xtreme XR1267 Скачать руководство пользователя страница 39

Страница: 39 / 80

For information call (800) 497-1704

Page 37

XR1267

Operator Cab



Warning

DO NOT adjust the seat or seat belt while

the forklift is moving. Keep both hands on

the wheel while the forklift is moving to

prevent loss of forklift control which could

result in death or serious injury.

Before starting the engine, adjust the seat for position and

comfort (refer to the Operator Seat section of this manual)

and then adjust the seat belt as follows:

Grasp the free end of the seat belt (located on the left

side of the seat) and make sure the belt webbing is

not twisted or entangled in any portion of the seat

assembly

Pull the retractable seat belt across your lap Position

the seat belt as low on your body as possible

Insert the latch plate into the buckle (on the right side

of the seat) until a “click” is heard

Make sure seat belt retracts snugly across your lap

Rear View Mirrors

Two (2) adjustable rear view mirrors are provided to aid

the operator’s rear vision One (1) rear-view mirror is

mounted on the upper left of the operator’s cab

Figure 6-14. Cab-Mounted Mirror.

Figure 6-15. Frame Mounted Mirror.

Controls and Indicators

Travel Select Lever

The travel select lever has three (3) positions:

FORWARD, NEUTRAL, and REVERSE, which change the

direction of travel

Table 6. Travel Select Lever

Position

Purpose

Forward UP Position (Away from the operator)

Neutral

CENTER Position

Reverse

DOWN Position (Toward the operator)

Figure 6-16. Travel Select Lever.

The travel select lever automatically locks when it is in the

NEUTRAL position The operator must raise and move

the travel select lever when changing to the FORWARD or

REVERSE position

NOTE:

The travel select lever must be in the

NEUTRAL position to start the reach forklift

NOTE:

The back-up alarm automatically sounds when the

travel select lever is in the REVERSE position

Содержание XR1267

















































































Результаты поиска

Содержание XR1267

Отзывы:

Похожие инструкции для XR1267

Бренды по названию

Популярные бренды

Xtreme XR1267, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XR1267

Отзывы:

Похожие инструкции для XR1267

Бренды по названию

Популярные бренды